, , ,

Firewood Cutting and Safety Tips!

, , ,

By Mitch Lippencott
ISA Certified Arborist®
October 31, 2024

Fall is the time for football, leaf-peeping, pumpkin spice everything, and if you're like me, SO! MUCH! FIREWOOD! to process!!! In my twenty years of heating my home almost exclusively with firewood, I have learned a lot of tricks that inevitably came with learning from my mistakes. The following is a list of safety reminders and veteran advice for processing and burning wood in your own home. 

GETTING STARTED

When getting started, have a professional inspect and clean your chimney, stove, and/or fireplace annually. For heavier users like me, a second cleaning may be needed mid-winter. NEVER burn until recommended repairs are completed.

Keep fire extinguishers charged and easily accessible. Know how to operate one! Use appropriately aged hardwood species. For example, conifers should never be burned indoors. Never burn poison ivy or wood with vines you can't identify, even outdoors. Wood must be cut or split and sit long enough to allow moisture content to drop. This will typically take a minimum of 6 months. Wood with conks or mushrooms have sat too long.

Add an appropriately sized venting chimney cap to keep animals out (ask me how I know) and to protect against water damage. Water-loving tree species (ex: willow, cottonwood, and sycamore) are not dangerous to burn, but do not produce enough heat to warrant the effort.

CUTTING LOGS

Before cutting any logs, measure your stove’s opening to determine the size of your chainsaw cuts. Cuts that are too short wastes effort and time. You also don’t want to deal with the frustration of having an oversized piece of firewood that won’t fit through the door no matter how hard you try to force it or no matter how many times you rotate it. Ask me how I know… If you care about your back and chainsaw chain, you can cut your firewood on stacked logs or palettes for better work positioning. I strongly advise using a modern chainsaw with all safety features in place. Below is a video we’ve made on chainsaw maintenance and safety!

When using a chainsaw, I recommend staying safe and wearing personal protective equipment (PPE) such as ankle-high boots, chainsaw pants or chaps, hearing protection, and eye protection. If you want to complete the arborist look, you can also wear a helmet and hi-vis t-shirt too!  Cut out and discard any imperfections in the wood such as knots, bends, or flaws. These will be hard to split and may not be worth your time and energy.

SPLITTING LOGS (BY HAND) 

Splitting logs can be physically strenuous labor complete with bends, lifts, and cardiovascular stress. Be honest about your fitness and pace yourself! On the flip side, pre-cut and pre-split wood can be purchased relatively easily. It's far cheaper than a heart attack! When splitting logs, always wear ear and eye protection. Split logs on a large, flat stump or trunk section in an open space. Use a splitting maul, not an axe, and various metal splitting wedges. Again, make life easy and don't worry about waste - if a log is difficult to split, set it aside, and knock out easier pieces.

One important detail to consider about firewood once you have your split logs is to not move it! Firewood can contain insects and disease that could spread and harm another tree population. One harmful example is how emerald ash borer was first detected in the US around 2002 and wiped out, with no exaggeration, millions of ash trees across North America. The general accepted theory as to how emerald ash borer ended up in the US was through wood in a shipping crate that arrived from China. All of this to say, the exact distance varies based on county, state, and country, but the general recommendation is to burn wood within 10 miles of where it was purchased or from where the wood was split. For more information, DontMoveFirewood.org is a good resource! (not sponsored, just want to spread the message!)

 

STACKING

Stacking can surprisingly be another physically strenuous task, especially if you rush or try to stack too many logs at a time. Please pace yourself accordingly! When choosing a location, select a space elevated from the bare ground that can also be protected from rain and other weather. Leave a gap large enough to walk through between your woodpile and structures to make logs more accessible. More importantly, this will provide a buffer zone for insects, rodents, and wood decaying organisms between the stack and your house, shed, etc.

When stacking, place the flat side down. Round sides can roll, making the entire stack unstable. Build up corners and outside edges first - gaps in the middle can be filled as needed with less precision. Orient wedge-shaped logs inwards. Shifts or slides will fall harmlessly to the center instead of the whole stack toppling over.

 

BURNING

Before burning, have an evacuation plan ready that includes calling 9-1-1 in the event of an emergency. When it comes time to burn your firewood,  build up heat little by little. You can first ignite paper and work your way up to cardboard, then kindling, and eventually small logs. Cardboard doesn't burn hot enough to ignite full-sized logs. Burn as hot as possible to avoid buildup in the chimney. Remove ashes to a metal container daily. Wood ashes can increase a soil’s pH, so I would not recommend adding them to a mulch or compost bed unless you know that the pH level is below its optimal range for the trees or plants. Regularly inspect the interior and exterior of the room containing the chimney/stove.

Whether you're a veteran or a newbie, cutting and burning firewood is a physically demanding process with life and property threatening consequences. While the process should be respected with the proper safety procedures, it does not need to be intimidating. For those curious, Russell Tree Experts does not produce or sell firewood, but we do offer local, log delivery for you to process yourself! Safe and happy splitting my friends, those blisters will callus soon enough!

 

ADDITIONAL ARBOR ED ARTICLES

Sincerely,

Mitch Lippencott I Regional Manager, Russell Tree Experts

Mitchell Lippencott joined Russell Tree Experts in 2020 and has been in the green industry for over 20+ years with a diverse background ranging from working for a landscape design company, a retail garden center, and two municipalities! Mitch is an alum from The Ohio State University, a licensed pesticide applicator, a qualified tree risk assessor, and an ISA certified arborist. Outside of work, he enjoys traveling, cooking, and gardening.